| GENERAL |
| Type: |
Amateur HF transceiver |
| Frequency range: |
10-160 m + WARC in 12 bands
1.8-2.0 MHz (160 m)
3.5-4.0 MHz (80 m)
7.0-7.5 MHz (40 m)
10.0-10.5 MHz (30 m)
14.0-14.5 MHz (20 m)
18.0-18.5 MHz (17 m)
21.0-21.5 MHz (15 m)
24.5-25.0 MHz (12 m)
28.0-28.5 MHz (10 m)
28.5-29.0 MHz (10 m)
29.0-29.5 MHz (10 m)
29.5-29.9 MHz (10 m) |
| Tuning steps: |
Analog / continuous |
| Frequency stability: |
Less than 100 Hz per hour after 30 minutes warmup |
| Mode: |
AM / SSB / CW (AM TX and FM RX/TX option) |
| Channels / memory management: |
No built-in (12 memories in optional FV-102DM) |
| Repeater shift / offset: |
No dedicated (Use split or memory operation in optional FV-102DM) |
| Power supply: |
Mains: 100 / 117 / 200 / 234 VAC |
| Current drain / power consumption: |
RX: 95 VA (Heaters off)
TX: Max 440 VA (100 W output) |
| Antenna impedance / connector: |
50-75 ohm / SO-239 |
| Dimensions (W*H*D): |
368*129*310 mm (14.5*5.08*12.2") |
| Weight: |
15 Kg (33.1 lb) |
| Other features: |
VOX. NB. IF notch. |
| |
|
| |
|
| RECEIVER SECTION |
| Receiver system: |
Double conversion superheterodyne
1st IF: 8.2 MHz
2nd IF: 455 KHz |
| Sensitivity: |
AM: 1 uV (10 dB (S+N)/N), RF-amp on, no optional filter
FM: 0.4 uV (20 dB quieting), RF-amp on (with optional AM/FM unit)
SSB: 0.25 uV (10 dB (S+N)/N), RF-amp on, no optional filter
CW: 0.18 uV (10 dB (S+N)/N), RF-amp on, no optional filter |
| Selectivity: |
AM/SSB/CW (With no filter options):
2.7 KHz (-6 dB)
4.8 KHz (-60 dB)
The "Width" control adjusts continuously from 2.7 KHz to 500 Hz (-6 dB) |
| Image rejection: |
1.8-21.5 MHz: >70 dB
24.5-29.9 MHz: >50 dB |
| AF output power / speaker: |
1.5 W at 10% distortion / 8 ohm |
| External speaker connector: |
4-16 ohm |
| |
|
| |
|
| TRANSMITTER SECTION |
| RF output power: |
| |
1.8-25 MHz |
28.29.9 MHz |
| AM: |
~40 W (80 W input) |
~40 W (80 W input) |
| FM: |
~50 W (120 W input) |
~50 W (120 W input) |
| SSB (PEP): |
~100 W (240 W input) |
~75 W (160 W input) |
| CW (DC): |
~100 W (240 W input) |
~75 W (160 W input) |
NB1! AM and FM transmit requires the optional AM/FM unit
NB2! The PA is very conservatively driven, and can produce significantly
higher output power if properly peaked and tuned. |
| Modulation system: |
AM: Low level (with optional AM/FM unit)
FM: Variable reactance (with optional AM/FM unit)
SSB: Balanced |
| Max FM deviation (Factory set): |
±5 KHz |
| Spurious emissions: |
Better than -40 dB |
| Microphone impedance / connector: |
200-600 ohm / 8-pin (Metal locking ring connector) |
| Microphone input level: |
? mV |
| |
|
| |
|
| MISCELLANEOUS |
| Manufactured: |
Japan, 1982-1984 (Discontinued) |
| Additional info: |
Tube hybrid: 12BY7A driver and three 6146B finals (Yes, three!)
New price, october 1982 in the UK: £719.00
New price, december 1982 in the UK: £690.00
New price, october 1983 in the UK: £799.00 |
| Related documents: |
User manual (10.7 MB)
Service manual (40 MB) |
USATO 
